Back to blog
Outbound

What Is a Normal Connect Rate for UK B2B Cold Calls? (2026)

Reading time: 6min

Title card reading: What Is a Normal Connect Rate for UK B2B Cold Calls?

The short answer: a normal connect rate for UK B2B cold calls

In my experience, a normal connect rate for UK B2B cold calls is about 10% of dials. A connect is a real person answering and staying on the line, not a voicemail. Over the 90 days to 15 November 2026, our UK lists connected at 11.1% (4,173 connects on 37,611 dials). That is what we have seen, not a promise, and it moves most with the list you call.

What counts as a cold call connect rate

The same calls give different rates depending on who counts them. Here is one recent week from our dialler, 9 to 15 November, on 7,665 outbound dials:

  • The carrier reported 67.6% of dials as answered. That includes voicemail and machines.
  • A machine answered 46.1% of dials.
  • A human answered 13.6%.
  • A human stayed on for 20 seconds or more on 8.8%.
  • Our dialler’s connected-call count, the figure we use, was 9.4% (717 connects).
Bar chart of cold call connect rate: the same 7,665 dials counted five ways, from 67.6% carrier answered to 8.8% human on the line 20 seconds
The same 7,665 dials in one week, counted five ways: the rate depends on who is counting.

That week included two event-confirmation lists, about 15% of the dials, so it was not a pure cold-calling week. The 20-second check covers that week only.

What UK B2B cold calling connect rates look like

SourceWhat it countsSample and periodRate
Meeting Secured, UK listsA real person answering and staying on the line (dialler count)37,611 dials, 18 Aug to 15 Nov 202611.1%
Meeting Secured, all listsSame51,812 dials, same period9.3%
Meeting Secured, non-UK listsSame14,201 dials, same period4.7%
Meeting Secured, our UK cold calling statistics pageA call answered by a person for about 12 seconds or more90,203 dials, 1 Jan to 8 Nov 202612.9%

Our statistics page covers a longer period, so its 12.9% is a different cut, not a correction of our 11.1%.

The 11.1% includes two event-confirmation lists (1,149 dials). Without them it is 11.0%.

Even our own two counts differ. The statistics page counts a connect at about 12 seconds or more, and the dialler’s connected count is the one we use here. Check the definition before you compare any two figures.

If a low connect rate is what is holding back your outbound, book a demo and we will tell you honestly whether we are a fit. It is for UK B2B service and IT companies with deals of £10k or more.

What changes a connect rate

The list moves it most. Here are three groups of UK-targeted lists from 18 August to 15 November (not every list), grouped by who each list targets, not by company size:

AudienceConnect rateDials
Founders and owners of small firms16.1% (lists from 13.5% to 17.6%)about 2,400
IT, HR, operations and marketing leaders9.9% to 12.3%about 16,400
One client’s tiered account lists8.2% overall, including six tier lists at 3.6% to 7.1%about 4,100

The 8.2% includes other lists for that client beyond the six tier lists. For small firms I would quote about 13% to 18%.

The fairer comparison of two lists is 17.6% on marketing and advertising firms with 5 to 50 staff (221 connects on 1,259 dials, from the week of 18 August) against 4.7% across the six tier lists (69 on 1,453). That is about four times apart. These are different lists, weeks and SDRs, so it shows a gap between lists, not a controlled test.

Bar chart of UK B2B cold calling connect rate by list: 17.6% for marketing firms, 4.7% across one client's six tier lists
Connect rate by who each list targets, UK-targeted lists, 18 August to 15 November 2026: a gap between lists, not a controlled test.

Time of day made little difference in a three-day sample. I have no reliable split of direct dials against switchboard numbers yet, so I will not quote one.

From connect to meeting

Over the 90 days to 15 November, excluding an event campaign, we set about one meeting for every 375 dials (135 meetings on about 50,700 dials). A “meeting set” is a status in our dialler. Our statistics page gives 236 dials per meeting (382 meetings, 1 January to 8 November 2026), a different period and basis, so the two are not a pair.

Connect rate is a poor number to buy on, and our own history shows why. It was 15.6% from January to July 2026 (8,375 connects on about 53,600 dials) and 9.3% from 18 August to 15 November (4,838 on 51,812). Three things changed at once and I cannot separate them:

  • Daily dials rose roughly 2.5 to 4 times, from about 290 a day in January to 710 in October and 1,160 in November.
  • The audience mix shifted. A fifth of the January to July dials (10,900) went to regional data lists and our own outreach lists, at about 18%. The last 90 days lean on IT, HR and operations leaders, tiered account lists and non-UK lists.
  • One international payments campaign fell from 11.5% on about 11,100 dials to 5.6% on 9,080.

So the fall alone does not tell you whether the calling got worse. Meetings per dial is the number I would compare on.

If you think SDRs cannot reach anyone

Part of that is true. About nine in ten dials do not connect on our UK lists. But in the 9 to 15 November week, on about 6,500 cold dials, our SDRs had around 560 connects, about 280 real conversations and around 20 meetings. About half of connects became a conversation.

Some audiences are harder. Six tier lists for one client ran at 3.6% to 7.1%. If your list looks like those, it will connect less, and the fix is the data and the audience, not more dials. To settle it, test on your own audience. Agree a list, a number of dials and the definitions up front, and we report dials, people reached, conversations and meetings.

What to do if your connect rate is low

The last time a client worried about this was a large software client. Its first two lists, from 8 and 10 September, had connected at 11.5% (99 connects on 863 dials). Its six tier lists ran at 4.7% in total (69 on 1,453 dials), and the weakest, first dialled on 13 October, at 3.6% (249 dials). The numbers pointed at the lists, not the effort, so we rebuilt them with fresh data and tightened who we called.

The new lists connected at 8.7% (two lists from 28 October, 576 dials), 10.7% (one list from 2 November, 382 dials) and 15.0% (a list for the client’s second brand from 6 November, 173 dials). These are small lists, and the two October lists were still being dialled in November, so read it as a recovery, not a precise timeline. Meetings have been slower to follow than the connect rate, so we keep the conversation on meetings, not just connects.

How to judge an agency’s connect rate

Ask four things before you trust any number:

  1. What counts as a connect? If voicemail is in there, a number above 60% is easy to show.
  2. Which list did it come from? In our data, one list connected at about four times the rate of another.
  3. What sample and period? A rate with no dial count and no dates is a claim.
  4. UK or blended? Ours is 11.1% on UK lists and 9.3% across everything.

Then compare on meetings per dial. For the wider market, see how UK telesales companies compare.

Next step

If your connect rate looks wrong and you are not sure whether it is the list, the calling or the market, book a demo and we will say plainly if we are the right choice. For the wider numbers, read our UK cold calling statistics. To weigh outsourcing against doing it yourself, see outsourced against in-house outbound.

Subscribe to our newsletter